Filter
Top Products
- 9 -
Section Five - Camera Functions
If the camera is in energy save mode, press the function button once to switch to
working mode.
Turn Camera Off
1. Press the Function button to select “
” shown on LCD display.
2. Press the shutter button within 5 seconds to turn camera off.
Auto-Shoot Mode
1. Press the Function button to select “
” shown on LCD display.
2. Press the shutter button within 5 seconds to activate the 10 second timer.
3. The camera will beep once per second. After 10 seconds the photo will be taken.
Continuous Shoot Mode
1. Press the Function button to select “
” shown on the LCD display.
2. Press the shutter button within 5 seconds to activate continuous shoot mode. Do
not release the shutter button.
3. The camera will beep once for each photo taken until the shutter button is
released or the memory is full.
Note
:
1. While the camera is shooting in this mode, the incorrect exposure may be
displayed.
2. The Continuous Shoot is only in QVGA mode.
3. Photos taken in Continuous Shoot mode can be downloaded individually.
Continuous Shoot Mode – 3 shots
1. Press the Function button to select “
” shown on the LCD display.
2. Hold down shutter within 5 seconds and it will take 3 photos continuously (saved
in VGA format).
Delete All Photos
1. Press the Function button to select “
” shown on the LCD display.
2. Press the shutter button within 5 seconds, the photo counter will flash. Press the
shutter button again within 5 seconds and all photos will be deleted from the
camera memory.
Note
:
If you do not press the shutter button within 5 seconds, no photos will be deleted
and the camera will return to the normal working state.
Delete Last Photo