Filter
Top Products
- 3 -
Section Three – Software and Camera Driver Installation
IMPORTANT: Before attempting to install the software, ensure that you do not have
the camera attached to your computer. This will affect the installation process and
could cause your installation to fail. Do not connect the cable to the computer until
the entire installation process has been completed. We recommend
following
the step by step instructions that will appear on your screen during the installation
process.
1. Insert the CD into your CD-Rom drive. Make sure that your camera
is not
connected to the computer.
2. For WIN 2000 or WIN XP operating systems - On the “Install your
camera software” screen, select your camera model from the drop
down list and click the “Install” button to install PhoTags Express
followed by the installation of PhoTags WebCam Express and your
camera driver.
For WIN 98SE operating system- On the “Install your camera
software” screen follow these instructions:
1. Click the “DirectX” button and follow the installation instructions,
restart your computer after the installation.
2. Insert the CD into your CD-Rom drive. Make sure that your camera
is not connected to the computer.