Filter
Top Products
batteries. If you want to replace the batteries, please make sure to download any photos that may be
in the memory of the camera, as they will be lost when the batteries are removed.
1. Open the battery compartment.
2. Load the batteries correctly (please check that the batteries are placed inside with the proper
polarity).
3. Close the battery box cover.
If you do not use this camera for quite a long period, please take out of the batteries to avoid the
discharging or corrosion of the batteries.
Please do not put the batteries into a fire to avoid explosion subsequent injury to you or others
around you.
Auto Energy-Save Mode
In order to conserve battery power, if the camera is not used within 30 seconds after powering on,
the camera will automatically enter into energy saving mode. This will prolong the life of the
batteries. To wake up the camera from the energy saving mode, simply press the Select button.
IMPORTANT NOTE: TO ACHIEVE THE BEST CLARITY, MAKE CERTAIN
THAT THE DISTANCE BETWEEN THE CAMERA AND THE SUBJECT IS 5
FEET.
Installation of
CD-10 Software
84379 Software Installation
IMPORTANT: Before attempting to install the software, make sure that you do not have the
camera or the USB cable attached to your computer. This will affect the install process and
will cause your installation to fail. Do not connect the cable to the computer until the entire
installation process of both PhoTags Express and the Camera Driver has been completed. We
suggest you follow the step by step instructions that will appear on your screen during the
installation process.
SECTION ONE- Software & Camera Driver Installation
1. Insert the CD into your CD-Rom drive. Make sure that your camera is not
connected to the
computer.
2. You will be prompted to select an installation language. Select the language you want.
3. On the “Install your camera software” screen, select your camera model from the drop down