Filter
Top Products
Owner’s Manual - 6 -
Operation Instruction
Turn on the power
Press the MODE button for about 3 second to turn on the power, and then operate after beep.
Take Photo
1. Press the MODE button to power on your camera.
2. Hold the camera steadily and press the shutter button to take the photo. The camera will
beep once after the image is saved. The number will appear on the LCD display. If the
camera does not beep after a picture is taken or FUL appears on the LCD display, then the
memory is full.
Note: You cannot use the LCD monitor to preview the objects.
Self-timer Photography
1. Press the MODE button to select the icon shown on the LCD display.
2. Press the Shutter Button within 5 seconds. The timer runs for about 10 seconds
before the photo is taken.
Note: The camera will return to standby mode if you do not press the button
within 5 seconds.
Motion Photography
1. Repeatedly press MODE button to select the icon shown on the LCD display.
2. Press the Shutter Button within 5 seconds. The flash LED will keep flashing.
3. Press the Shutter Button to stop the motion photography.
Note:
¾ The photos taken by this mode will be saved as AVI (Audio Video Interleave)
format, and can be played by Webcam Express, Media Player or Quick Time.
¾ The shooting time varies slightly depending on the available space on your camera. If the
indicated LED is not flashing, then the memory is full.
3pcs Continuously Shoot
1. Repeatedly press MODE button to select the icon shown on the LCD display.
2. Press the Shutter Button within 5 seconds. 3pcs photos will be taken continuously.
Note: The photos taken by this mode will be downloaded individually. After the capture, the
picture number on the LCD display will be updated to 3 more pictures.
Delete All of the Photos
1. Repeatedly press MODE button to select the icon shown on the LCD display.