Filter
Top Products
11
Formatting Internal Flash Memory or SD Card
To format internal flash memory or SD card
Warning: Formatting an SD card or flash memory will delete all information.
• If formatting an SD card, insert the card into the camera. Remove the SD card if you
are formatting the internal flash memory.
• Turn the camera on and switch the Picture-Taking Mode/ Playback Mode to playback.
• Press the Menu button and use the up/down arrow buttons to Select Format.
• Press the Select button to confirm your selection.
• Use the up/down arrow buttons to select Yes/No.
• Press the select button to confirm your selection.
• To resume taking pictures, switch the mode selection switch to Picture-Taking mode.
FCC DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Product: FlatFOTO 2.0 Digital Camera
Model: 16-3831
Responsible Party: RadioShack
100 Throckmorton
Fort Worth, TX 76102
Phone: 817-415-3200
The FCC Wants You to Know
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult your local RadioShack store or an experienced radio/TV technician for help.