Samsung 800P Digital Photo Frame User Manual


 
Safety precautions
4
Do not drop the frame or subject the frame to any •
strong impacts. If the frame is damaged, disconnect
the power cord and contact a dealer or an authorized
service center.
Always unplug the power cord when cleaning the frame. •
Use only a soft, dry cloth to wipe frame. Do not expose
the frame to any chemicals, such as waxes, benzene,
alcohol, thinners, insecticides, air fresheners, lubricants,
or detergents, as these may damage the frame’s finish
and void your warranty.
Clean the product with a soft dry cloth.•
Avoid cleaning the product with a flammable substance such -
as benzene or thinner or with a wet cloth. This may result in
damage to the product.
Avoid scratching the screen with your fingernails or a sharp -
object.
Avoid cleaning the product by spraying water onto it. If water -
enters the product, it may result in fire, electric shock or
malfunction.
Avoid using a supersonic humidifier near the product. It may -
result in a white stain on the surface of the product.
Never insert any metal objects into the open parts of •
this frame, as this may result in electrical shock. Ensure
that the power cord is completely plugged in when
using this frame. Grasp the plug firmly when removing
the power cord and never touch the power cord with
wet hands.
If you notice any unusual operation, such as unusual •
sounds or burning smells coming from the frame,
unplug it immediately and contact the dealer or an
authorized service center.
It is not recommended to install the frame in a location •
where it will be exposed to heavy dust, high or low
temperatures, high humidity, or chemical substances or
where it operates continuously.
Use only properly grounded plugs and outlets when •
connecting this frame. Improper grounding may cause
electrical shock or damage to equipment.
Keep this frame and all accessories out of the reach of •
children.
Do not install the frame in unstable locations, such as •
improperly mounted shelves, angled surfaces, or where
the frame may be exposed to vibration.