Filter
Top Products
54
Using the Flash
Use the flash according to the guidelines below.
1
Press the button to switch between
flash modes.
• The selected flash mode appears on the LCD
monitor.
• You can switch between settings by pressing the
button.
When the red-eye reduction function is on
When the red-eye reduction function is off
2
Shoot the image.
• The flash will fire if the indicator beside the viewfinder lights orange when
the shutter button is pressed halfway. (In
, the flash does not fire.)
• Shooting procedures are the same as for the
mode (p. 45).
Red-eye reduction, Auto
The flash fires automatically as required by the lighting level, and the
red-eye reduction lamp fires each time the main flash fires
Auto The flash fires automatically as required by the lighting level.
Red-eye reduction, Flash on
The red-eye reduction lamp and the flash always fire.
Flash on The flash always fires.
Flash off The flash does not fire.
Setting the Red-eye Reduction Function
The red-eye reduction lamp fires when the flash is used in dark areas. This prevents
light from reflecting back from the eyes and making them appear red.