Filter
Top Products
Wireless network/Bluetooth
101
Viewing photos on the DLNA devices
Viewing photos on another device (renderer)
In Shooting or Playback mode, select
1
N
.
The camera automatically connects to the WLAN via the last t
connected AP device.
If the camera has not connected to the WLAN, it automatically t
searches for the available AP devices. (p. 92)
If the camera has connected to the WLAN, it automatically t
searches for and displays the available DLNA-enabled
devices. However, searching for the devices may take some
time.
Select a device (renderer) that will play the photos.
2
Drag a photo to the selection area or select a photo.
3
The photos will appear on the device’s screen.t
To view other photos, drag a photo to the selection area one t
by one on your camera.
On a TV screen, you can view only photos captured with your camera.t
The distance between the camera and TV may be affected by the t
AP device.
If the camera is connected to 2 TVs, playback may be slowed.t
The photos will be shared according to the size you set. (p. t 95)
You can use this feature only with a DLNA-authorised Digital Media t
Players (DMPs).
Shared photos will not be stored on the TV, but they can be stored t
according to the TV specifications.
Transferring photos to the TV may take some time depending on the t
network connection and the photo size.
If you power off the camera abnormally while viewing photos on a t
TV (ex. removing battery), the TV considers the camera to still be
connected.
The order of photos on the camera and TV could be different.t
According to the number of photos you want to share, it may take t
some time to load your photos and complete the initial set-up
process.
While viewing photos on the TV, continuously using the TV remote or t
performing additional operations on the TV may prevent this feature
from working properly.
If you reorder or sort photos on the camera while viewing them on t
a TV, you must repeat the initial setup process to update the list of
photos on the TV.
When there are no photos in the camera memory, you cannot use t
this feature.