Filter
Top Products
Wireless network/Bluetooth
93
Connecting to a WLAN and configuring network settings
Some AP devices will not allow your camera to connect to the t
network.
If you are far from the AP device, it may take long to connect to the t
network.
If there is any electronic equipment nearby that uses the same radio t
frequency (RF) signals, the camera may not connect to the AP device.
If the AP device has a non-English name, it may not appear in the t
search list or the name may appear jumbled or incomplete.
For network profiles and a password, contact your network t
administrator or network service provider.
If the network requires any authentication from the service provider, t
you may not connect to it. Contact your network service provider.
The number of characters and numbers allowed for the encryption key t
differs depending on the encryption type.
A WLAN connection may not be possible depending on your t
surroundings.
When searching for networks, you may be able to find a printer that t
supports the network. However, you cannot use the printer to connect
to a network.
The camera cannot connect to the network if it is connected to t
a TV with the A/V cable. Also, when the camera is connected to
the network, you cannot view photos on a TV screen even when
connected with the A/V cable.
When connecting to the network, you will be charged according to t
your contract with your network service provider.
You can use only free WLANs with your camera. If you use free t
WLANs that require the user agreement and additional information
when you connect to a web browser, some features may be limited
when connecting to websites or sending email.
Frequency ranges allow you to connect to the network will differ t
depending on the country.
The WLAN feature of your camera must comply with radio t
transmission laws, so use of this feature may be restricted in some
countries. We recommend that you use the WLAN feature in the
country where you purchased the camera.
Select network profiles and options.
4
Option Description
Authentication
Select a network authentication.
Data Encryption
Select an encryption type.
Select the password input field.
5
Enter a password and select
6
OK.
For information about entering text, refer to page t 96.
Select
7
OK.
The camera will connect to the WLAN.t
On the top line of the screen, you can check the network t
signal status.
Icon Description
Signal is found.
No signal is found.