Filter
Top Products
55
ENGLISH
5555
ENGLISH DEUTSCH
Advanced Recording
●
DATE/TIME
✤ The DATE/TIME function works in CAMERA, PLAYER, M.REC and
M.PLAYmodes.
✤ The date and time are automatically recorded on a special data area of
the tape.
1. Press the MENU button.
■
The menu list will appear.
2. Turn the MENU DIAL to highlight VIEWER and
press the ENTER button.
3. Turn the MENU DIAL to highlight DATE/TIME.
4. Press the ENTER button to select the sub-menu.
5. Using the MENU DIAL, select the DATE/TIME mode.
■
You can choose to display - the OFF, DATE, TIME,
DATE/TIME
- OFF only
- DATE only
- TIME only
- DATE & TIME
■
To return to the previous menu, highlight the
DATE/TIME in the middle of OSD and
press the ENTER button.
6. To exit, press the MENU button.
Notes
■
The DATE/TIME is not affected by the OSD ON/OFF
(DISPLAY) button.
■
The DATE/TIME will read “- - -” in the following
conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the DATE/TIME in the Camera’s
memory.
- When the lithium battery becomes weak or dead.
■
Before you use the DATE/TIME function, you must set the Clock.
See CLOCK SET on page 39.
●
DATE/TIME /
✤ CAMERA PLAYER M.REC
M.PLAY DATE/TIME /
✤ DATE/TIME /
1. MENU
■
2. MENU DIAL
VIEWER ENTER
3. MENU DIAL
DATE/TIME /
4. ENTER
5. MENU DIAL DATE/TIME
/
■
OFF
DATE TIME DATE/TIME
/
- OFF
- DATE
- TIME
-DATETIME
■
DATE/TIME / ENTER
6. MENU
■
DATE/TIME / /
DISPLAY
■
DATE/TIME /
- - -
-
- DATE/TIME /
-
■
DATE/TIME /
39 CLOCK SET
CAM MODE
VIEWER SET
LCD ADJUST
DATE / TIME
TV DISPLAY
CAM MODE
INITIAL
LCD ADJUST
DATE / TIME
TV DISPLAY
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
DATE / TIME
VIEWER SET
DATE
TIME
DATE&TIME