Filter
Top Products
43
ENGLISH
Advanced Recording
4343
ENGLISH DEUTSCH
●
DEMONSTRATION
✤ Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more
easily.
✤ The DEMONSTRATION function may only be used in the
CAMERA mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
■
The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and press
the ENTER button.
5. To activate the DEMONSTRATION, set
DEMONSTRATION ON.
■
Press the menu button to quit the menu.
■
The demonstration will begin.
6. To end the DEMONSTRATION, set the
DEMONSTRATION to OFF.
Notes
■
The DEMONSTRATION function only works without a
TAPE installed.
■
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAMERA mode (no tape is inserted in the camcorder).
■
If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
■
While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
●
DEMONSTRATION
✤
✤ DEMONSTRATION CAMERA
✤ DEMONSTRATION
OFF
1. CAMERA
2. MENU
■
3. MENU DIAL
INITIAL
4. DEMONSTRATION
ENTER
5. DEMONSTRATION
DEMONSTRATION ON
■
MENU
■
6. DEMONSTRATION
DEMONSTRATION OFF
■
DEMONSTRATION
■
CAM
10 DEMONSTRATION
■
DEMONSTRATION
FADE BLC PHOTO EASY
DEMONSTRATION
10 DEMONSTRATION
■
NIGHT CAPTURE ON
DEMONSTRATION
CAM MODE
INITIAL CLOCK SET
WL. REMOTE
BEEP SOUND
SHUT. SOUND
LANGUAGE
DEMO
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
SHUTTER SOUND
BEEP SOUND
DEMONSTRATION
LANGUAGE
ENGLISH