Filter
Top Products
ENGLISH
Advanced Recording
6. Press the [
……
/
††
] button to select the desired mode <Auto>, <Indoor>,
<Outdoor> or <Custom WB>, then press the [OK] button.
■
To explain about the Custom WB:
(1) Select Custom WB and press the [OK] button. (“Set white balance” will
appear and blinks on the screen.)
(2) Place the white object under the desired lighting then press the [OK] button.
(The OSD will disappear and the Custom WB icon ( ) will be displayed.)
7. To exit, press the [MENU] button.
■
When the <Auto> mode is selected, no icon is displayed.
[ Notes ]
■
You can directly access the White Balance function using the [Q.MENU] button.
➥page 20
■
The White Balance function will not operate in EASY.Q mode.
■
Turn the Digital Zoom off (if necessary) to set a more accurate white balance.
■
Reset the white balance if lighting conditions change.
■
During normal outdoor recording, setting to Auto may provide better results.
■
Buttons other than EASY.Q button, [MENU] button, [
……
/
††
] button, [Zoom] lever and
[OK] button will not work during setting the Custom WB.
■
Pressing the [MENU] button while setting the Custom WB will cancel the Custom
WB setting and sets the White Balance to Auto.
5151
<When the Outdoor option was selected>
Move Select Exit
MENUOK
Auto
Indoor
Outdoor
Custom WB
c
A
6
Camera Mode
Back
Program AE
White Balance
Visual Effect
16:9 Wide
Macro
DIS
▼
60min
0:00:10
SP
STBY
œ
7
1166::99 WWiiddee
c
01227G VPD371 UK~071 2/1/07 12:03 PM Page 51