Filter
Top Products
86
Setting up the application software
If you have installed the camera driver, [Found
New Hardware Wizard] may not open.
After the [Found New Hardware Wizard] window
opens, a window asking you to select a driver file
may appear. In this case, specify the
C:\WINDOWS\INF folder (for Windows 98 and 98
SE). If you can't find the [INF] folder, check the
[Show all files] button in [Window's Explorer
View Folder option View].
When connecting the camera to your PC,
it is recommended that you use an AC power adapter.
Before connecting the camera to the PC, you should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open. In this case, cancel the [Found New Hardware Wizard] and
disconnect the camera. Install the camera driver and connect the camera to the PC
again.(p.79)
Should the computer not find the camera driver after installation, please try one or more
of the following measures.
1. Delete the camera driver (p.90), and re-install the driver.
2. Refer to FAQ (p.97~98) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
INFORMATION