Filter
Top Products
Using burst modes (Continuous/Precapture/Bracket)
Shooting options
76
Capturing photos in the Precapture mode
In Precapture mode, the camera starts shooting before you even press the shutter
all the way down. If you do not want to miss the rst couple of important shots,
simply use this mode and select the photo with the best results after shooting.
1
In Shooting mode, press [
t
].
2
Select Precapture.
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
•
The camera captures 6 photos continuously. If you release [Shutter] too fast,
the camera captures less than 6 photos.
4
Press [Shutter].
•
The camera captures the last photo and then saves all of the captured photos
while you are half-pressing [Shutter]. (total 7 photos)
•
If you do not press [Shutter] all the way down, the photos captured while
you are half-pressing [Shutter] will not be saved.
Capturing bracketed photos
You can use the automatic bracketing feature to capture multiple photos of the
same subject with dierent setting values slightly modied, such as exposure or
white balance.
1
In Shooting mode, press [
t
].
2
Select a bracketing option.
Icon Description
AE Bracket: Capture 3 photos with dierent exposures : normal,
underexposed, and overexposed.
WB Bracket: Capture 3 photos with dierent white balance.
3
Align your subject in the frame, and then half-press [Shutter] to
focus.
4
Press [Shutter].
•
The camera captures 3 photos continuously.
•
In some modes, you can also set a detailed option by pressing [
m
], and then
selecting Bracket Set.
•
It may take longer to capture the photo. Use a tripod for best results.