Filter
Top Products
057
Settings ( )
Setting the USB
If the camera fails to automatically connect with a PC or a printer using
a USB cable, you can manually set [Computer] or [Printer].
- [USB] sub menus:
[Auto]* : Automatically enables an
external device connected with
a USB cable.
[Computer] : Sets computer connection
mode if the connected external
device cannot be recognized
automatically.
[Printer] : Sets printer connection mode if the connected external
device cannot be recognized automatically.
Selecting a battery type
If a battery type is selected, the camera will be optimized according to
the selected battery type.
- [Battery Type] sub Menu :
[Alkaline]* / [Ni-MH]
Back Set
Auto Power Off :3 min
AF Lamp :On
Video Out :NTSC
USB :Auto
Battery Type :Alkaline
Imprint :Off
Auto
Computer
Printer
Back Set
Auto Power Off :3 min
AF Lamp :On
Video Out :NTSC
USB :Auto
Battery Type :Alkaline
Imprint :Off
Alkaline
Ni-MH