Filter
Top Products
015
Connecting to a power source
Ê
There are 4 indicators for battery condition that are displayed on
the LCD monitor.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or use
spare battery)
Low battery
capacity
(Prepare to
recharge or use
spare battery)
Battery empty
(Recharge
or use spare
battery)
Ä
When using the camera and the battery in a place that is excessively cold or hot,
the battery status on the LCD may be different from the actual battery status.
Ê
Insert the battery as shown
- If the camera does not turn on
after you have inserted battery,
please check whether the
battery (+ / -) direction is right.
- When the battery chamber
cover is open do not force the
battery chamber cover,
this may damage it.
Inserting the memory card
Ê
Insert the memory card as shown.
- Turn off the camera’s power
before inserting the memory card.
- Have the front label of the
memory card facing toward the
front of the camera (Lens) and
the card pins toward the back of
the camera (LCD monitor).
- Do not insert the memory card
the wrong way around.
Doing so may damage the
memory card slot.
Using the Anti-scratch Mask
Ê
Insert the anti-scratch mask as shown.
-
Using the anti-scratch mask
can protect the camera from
accidental scratches.
Make sure three points of
holes in the camera body are
connected to the anti-scratch
mask.