Filter
Top Products
fi rst time settings
SETTING THE TIME ZONE AND DATE/TIME
FOR THE FIRST TIME
Set the date and time of your local area when you turn on the
camcorder for the fi rst time.
1. Open the LCD screen to turn on the camcorder.
The time zone (“Home”) screen appears displaying settings for
Lisbon and London (Greenwich Mean Time).
2. Select your local area on the map by touching the left (
) or right
( ) tab on the LCD screen, and then press the ( ) tab.
The “Date/Time Set” screen appears.
3. Touch the date and time information, and then change the setting
values by using the up (
) or down ( ) tabs.
4. Make sure the clock is correctly set, and then touch the (
) tab.
The message “Date/Time Set” appears.
•
•
•
You can set the year up to 2037, based on the “Home” item.
Set “Date/Time Display” to On.
page 77
Activating the (
) icon moves the time forward by 1 hour.
•
•
•
Your camcorder includes a internal rechargeable battery that retains the date and time settings even
after the power is turned off.
If the battery is depleted, the current date/time values are reset to the default values. If this occurs, you
need to recharge the internal rechargeable battery (see below), and then re-set the current date and time.
The internal battery is always recharged while your camcorder is connected to the AC power or while
the battery is attached.
If you have not used the camcorder for about 2 weeks and you have not connected the AC power
or the battery to it, the internal battery fully discharges. If this occurs, charge the internal battery by
connecting the camcorder to the supplied AC adaptor for 24 hours.
•
•
•
•
Internal rechargeable battery
Charging the internal rechargeable battery
26
Date/Time Set
Month
Hr Min
Year Day
/
:
2010
12 00 AM
01 01
Date/Time Set
JAN/01/2010 12:00AM
Home
[GMT 00:00] JAN/01/2010 12:00AM
London,Lisbon
Date/Time Set
Day
Hr Min
Month Year
/
:
JAN
12 00 AM
01 2010
/