Samsung PRO4831 Security Camera User Manual


 
Sending photos or videos via email
Wireless network
122
Setting an email password
1
Rotate the mode dial to
w
.
2
Select .
The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 111)
3
Press [
m
].
4
Select Setting Password On.
To deactivate the password, select O.
5
When the pop-up appears, select OK.
The pop-up disappears automatically even if you do not select OK.
6
Enter a 4-digit password.
7
Enter the password again.
8
When the pop-up appears, select OK.
If you lost your password, you can reset it by selecting Reset on the password
setting screen. When you reset the information, the previously saved user’s setting
information, email address, and recently sent email list will be deleted.
Changing the email password
1
Rotate the mode dial to
w
.
2
Select .
The camera will automatically attempt to connect to a WLAN via the most
recently connected AP device.
If the camera has not previously been connected to a WLAN, it will search for
available AP devices. (p. 111)
3
Press [
m
].
4
Select Change Password.
5
Enter your current 4-digit password.
6
Enter a new 4-digit password.
7
Enter the new password again.
8
When the pop-up appears, select OK.