Filter
Top Products
English 110
INITIALIZING THE CARD MEMORY
AND INTERNAL MEMORY
A card must be formatted with this camera:
i After purchasing, when used for the first time, or
i If it was formatted using a personal computer or another digital camera.
The card cannot be reformatted if the lock switch is set to the “LOCK”
position. Proceed with the reformat procedure after setting the lock switch to
the unlocked position.
1 To reformat a card, install it in the camera. To reformat the camera’s
internal memory, remove the card from the camera.
2 Display the Setup Menu (page 98).
3 Select “FORMAT” and press the OK
button.
<Card format>
h The screen to select the type of
format appears.
h Follow steps 4 to 6.
FORMAT:
A normal formatting is executed.
FULL FORMAT:
The entire card is scanned and
reformatted. It is not possible to
select this when there is no card
installed, when a MultiMedia card is
installed, or when the remaining
battery charge is low.
<Internal memory format>
h The screen to confirm formatting
appears.
h Follow steps 5 and 6.
OK
OK
OK
FORMAT
FULL FORMAT
( CARD)
( CARD)
( CARD)FORMAT
FORMAT
FORMAT
OK
OK
OK
EXIT
YES
Format
Format
the internal memory?
the internal memory?
Format
the internal memory?
<With card installed>
<No card installed>