Filter
Top Products
25 English
DATE AND TIME SETTING
The camera will record the date and time an image is captured so that you
can display them during playback. Therefore, before capturing images, make
sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 24, 2008
1 Press the ON/OFF button to turn
the camera on, and press the
MENU button.
h The Shooting Menu appears
(page 65).
2 Press the [o] button to select the
E tab, and press the [m] button.
h The Setup Menu appears
(page 99).
3 Press the [n] or [o] button to
select “CLOCK SET”, and press
the OK button or the [m] button.
h The Clock Set Screen appears.
h The current date and time
settings are shown.
h Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
h To return to the Setup Menu,
press the MENU button.
RESOLUTION
COMPRESSION
FOCUS MODE
EXP MEASURE
SHOOTING 1/2
ISO
TO SETUP EXIT
WHITE BALANCE
0
1sec
NTSC
SOUND
CLOCK SET
SETUP
1/2
POST VIEW
BRIGHTNESS
TV SYSTEM
LANGUAGE
SHOOTING EXIT
12:00
2008/01/01
OK
OK
OK
Y / M / D
CLOCK SET
CLOCK SET
CLOCK SET
E tab