Filter
Top Products
《46》
ISO
- AUTO
: The camera's sensitivity is automatically
changed by variables such as lighting value or
subject brightness.
- 80, 100, 200, 400, 800, 1000
: You can increase the shutter speed while the
same amount of light is present, by increasing the ISO sensitivity. However,
the image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light is and
therefore the greater its capacity to take pictures in dark conditions. However,
the noise level in the image will increase as the ISO value increases, making
the image appear coarse.
* S630 : You can select ISO 80, 100, 200, 400.
■ ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
6
ISO
Auto
Continuous shot
- [Single] : Take one picture only.
- [Wise Shot] : 2 images are taken at a time.
One is taken in the Fill-In Flash
mode and the other is taken in the
ASR mode.
- [Continuous] : Images will be taken continuously
until the shutter button is released.
The shooting capacity depends on
the memory.
- [AEB] : Take three pictures in a series in different exposures: standard
exposure (0.0EV), short exposure (-1/3EV) and over exposure
(+1/3EV).
■ You can select continuous shot, and AEB (Auto Exposure Bracketing).
● High resolution and picture quality increases file saving time, which
increases stand-by time.
● Wise shot is available in the ASR mode of S730 only(p.16)
● If the [Continuous] or [AEB] sub menu is selected, the flash will be off
automatically.
● If less than 3 pictures are available in the memory, the AEB shooting is not
available.
● It is best to use a tripod for the AEB shooting as the time to save each
image file is longer and blurring caused by camera shake may occur.
INFORMATION
[ PROGRAM mode ]
6
Single
DRIVE