Filter
Top Products
ŝ49Ş
Setup menu
[Series] : New files are named using numbers that
follow the previous sequence, even when a
new memory card is used, or after
formatting, or after deleting all pictures.
[Reset] : After using the reset function, the next file
name will be set from 0001 even after
formatting, deleting all or inserting a new
memory card.
- The first stored folder name is 100SSCAM, and the first file name is SNC10001.
- File names are assigned sequentially from SNC10001 ƍ SNC10002 ƍ~ ƍ
SNC19999.
- The folder number is assigned sequentially from 100 to 999 as follows:
100SSCAM ƍ101SSCAM ƍ ~ ƍ999SSCAM.
- The files used with the memory card conform to the DCF (Design rule for
Camera File systems) format.
[ File name ]
ƈThis function allows the user to select the file naming format.
[ Language ]
ƈThere is a choice of languages that can be displayed on the LCD monitor. Even
if the battery and AC charger are removed and inserted again, the language
setting will be preserved.
LANGUAGE sub menu :
English, Korean, French, German, Spanish, Italian,
S.Chinese, T.Chinese, Japanese, Russian,
Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA (MALAY / INDONESIAN), Arabic, Polish,
Hungarian, Czech and Turkish.
Series
Reset
OSD Set
OSD Set
File
Language
Date&Time
Ȝ
ENGLISH
FRANÇAIS
DEUTSCH
ह
OSD Set
OSD Set
File
Language
Date&Time
Ȝ
ƈHow to select the setup menu
1. In any mode with the exception of Photo Gallery
mode, press the extension menu button ( )
and press the setup menu button ( ).
2. Each buttons have different setup menus.
Press the F1-4 ( ) menu button.
Full
Basic
Hide
LCD Save
OSD Set
OSD Set
File
Language
Date&Time
[OSD set]
ƈYou can check shooting (Recording mode) and displayed image (Play back
mode) information.
Ȝ
OSD Set
OSD Set
File
Language
Date&Time
Ȝ
[Recording mode menu]
Full
Basic
Hide
OSD Set
OSD Set
File
Language
Date&Time
Ȝ
[Play back mode menu]
Full
Basic
Hide
LCD Save
[Full] : When the smart button is touched, the icons will be enlarged and OSD
will be displayed.
[Basic] : When the smart button is touched, the icons will be enlarged and OSD
will not be enlarged.
[Hide] : If the camera doesn't operate for about 3 seconds, all OSD will
disappear. When the shutter is pressed down or half way down, the
shutter speed and auto focus frame will display. OSD may display by
using the camera buttons except for the shutter button.
[LCD save] : If the camera is not used for about 30 seconds, the power and
camera status lamps blink and the LCD monitor turns off.
Exit:BACK
Exit:BACK Exit:BACK
Exit:BACK
Exit:BACK