Filter
Top Products
ŝ9Ş
Identification of features
ƈSelf-timer lamp
Icon Status Description
-
For the first 7 seconds, the lamp blinks at 1 second intervals.
- For the final 3 seconds, the lamp blinks quickly at 0.25-
second intervals.
For the 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture
A picture will be taken after about 10 seconds and 2 seconds
later a second picture will be taken.
Pressing the shutter button of remote control will allow an
interval of 2 seconds before the image is taken.
Blinking
Blinking
Blinking
Blinking
ƈCamera Status Lamp
Status Description
ƈMode dial
You can select the desired working mode by using the mode dial located on the
top of the camera.
ƃAUTO mode
Select this mode for quick and easy picture taking with
minimal user interaction.
ƃPROGRAM mode
Selecting the program mode will configure the camera
with optimal settings. You can still manually configure all
functions except the aperture value and shutter speed.
ƃMANUAL mode
You can manually configure all functions including the
aperture value and shutter speed.
ƃASR mode
Advanced Shake Reduction (ASR) mode. This mode will
reduce the camera shaking and help you get a good
image.
After taking a picture
The lamp blinks while saving the image and then
turns off when ready to take another picture
The lamp blinks
The lamp lights up
(LCD monitor turns off after initializing the device)
The lamp turns on (LCD monitor turns off)
The lamp lights (The subject is in focus)
The lamp blinks
The lamp is off
The lamp blinks (The subject is not in focus)
While voice memo recording
When the USB cable is
inserted to a PC
Transmitting Data with a PC
When the AF activates
When the USB cable is
inserted to a printer
When the printer is printing