Filter
Top Products
ŝ51Ş
Setup menu
[ Start up sound ]
ƈYou can select the sound that is activated whenever the camera is turned on.
[ Sound Volume ]
ƈYou can select the sound volume of start sound, operation sound and shutter
sound.
ƃ[Sound Volume] sub menus : [Off], [Low], [Medium],
[High]
Off
Low
Medium
High
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
ƃStart up sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
[ Operation Sound ]
ƈIf you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
ƃ[Sound] sub menus : [Off], [Sound 1], [Sound 2],
[Sound 3]
[ Quick view ]
ƈIf you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
ƃSub menus
[Off] : The quick view function can’t be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
Off
0.5 sec
1 sec
3 sec
Imprint
LCD
AF Lamp
Power Off
Quick View
Ȝ
Off
LOGO
User image
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȝ
[ Start up image ]
ƈYou can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
ƃStart up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the
[START IMAGE] in the [RESIZE] menu in the play
mode.
- The start-up image will not be deleted by [DELETE]
or [Format] menu.
- The User images will be deleted by [Reset] menu.
Exit:BACK
Exit:BACK
Exit:BACK
Exit:BACK
Exit:BACK