Filter
Top Products
ENGLISH
37
Advanced Recording
EASY Mode (for Beginners)
✤ Even a beginner can easily make a recording using the EASY mode.
■ The EASY mode only operates in CAMERA mode.
1. Set the power switch to CAMERA mode (see page 22).
2. By pressing the EASY button, all the functions of the camera will be
set to off and the recording settings will be set to the following basic mode.
■ Battery level, recording mode, counter, date/time,
DIS ( ) will be displayed as the camcorder starts to run.
■ The word “EASY” will appear on the LCD at the same time.
However, the Date/Time will only be seen if it has been
previously set.
(DIS ( ) will be displayed on SCL750/L770 only)
3. Press the START/STOP button to start recording.
■ Recording will begin using the basic automatic environment settings.
4. Pressing the EASY button again turns the EASY mode off.
■ The camera will return to the settings that were set prior to
the EASY mode being switched on.
Note:
The Easy mode settings are stored in the camera (provided a good lithium battery has been installed).
STBY
X:XX:XX
EASY
JAN. 31, 2002