Samsung SCL700 Camcorder User Manual


 
Advanced Recording
PIP (Picture-In-Picture, SCL750/L770 only)
ENGLISH
51
The PIP(Picture-In-Picture) feature works in combination with the DIGITAL ZOOM function by using a small,
superimposed screen to show an image that is wider than the image being recorded.
This should help you to get a more clear idea of what you are recording.
- The PIP function works in CAMERA mode only.
1. Set the power switch to CAMERA mode.
2. Turn on DIGITAL ZOOM. (see page 35)
3. Press the MENU ON/OFF button, the MENU List
will be displayed.
4. Turn the UP/DOWN dial until PIP..........OFF is highlighted.
5. Press ENTER, PIP ON and a small screen
should appear.
6. Check which part you are recording on the PIP screen, and turn the
Zoom button to “T” position to activate the DIGITAL ZOOM mode.
Start recording by pressing the START/STOP button
when the portion you want to record appears.
7. Setting PIP......ON to OFF in the MENU will make the small
screen disappear and switch the PIP mode off.
Notes: When you use the PIP function while making a recording,
the PIP screen will be recorded on the Tape.
The MENU ON/OFF function will not operate in EASY mode.
PIP function will not operate in DSE mode.
CAMERA
MENU
LCD ADJUST
DIS........................OFF
D.ZOOM ..............OFF
PIP........................OFF
DISPLAY ..............ON
WHITE BAL..........AUTO
WL REMOCON....ON
EXIT: MENU
MENU
LCD ADJUST
DIS........................OFF
D.ZOOM ..............OFF
PIP........................ON
DISPLAY ..............ON
WHITE BAL..........AUTO
WL REMOCON....ON
EXIT: MENU
ENTER