Filter
Top Products
1. Tap the desired camera’s [ ] or
tap the <Live> icon.
2. Enter the <Camera password>
for the camera selected. This is
the same camera password you
created at the time you registered
the camera.
Check the <SAVE> option to
save the camera password.
Within 20 seconds, it will start
streaming.
M
` The loading time may be longer depending on the policy of the
service provider or the network connection status.
Live Video
No. Description
a
Capture You can capture and save a still image from the video.
b
HQ
Enables high quality video (640x480 resolution).
`
Video and audio playback depends on the policies of
your service provider or the network connection status.
c
Flip Flips the video image.
d
Brightness Adjusts the screen brightness.
e
Two-way
Audio
Enable 2-way audio between the camera and the
phone.
f
Mic
Press and hold to talk. Let go to hear front from the
camera.
Two-way Audio
1. Tap on the Two-way Audio icon.
2. The Mic icon will appear.
3. Press and hold the Mic icon and start talking. Press and
hold for 2sec after finished talking to properly send the
audio over the internet.
4. Even if you did not activate the two-way audio function,
you can receive the audio sound of the video. In addition,
the microphone setting should be at least 1 or higher if you
want to use the two-way audio function.
J
` When there are multiple users logged on to the camera, first person
who tap the Talk icon will have the control.
Condition Audio Support
WiFi
O
3G/LTE Depending on your network.
Relay Mode
X
Relay mode
If the router where your camera is connected to does not have
the UPnP function or if the camera is connected to a dual
router, your mobile device will be connected to the 3G or LTE
network in a relay mode and you will see the video for the first
seven minutes only. In this case, set your mobile device to WiFi
network to achieve a normal connection.
J
` Relay mode is added feature where the video from the camera is
transmitted to Samsung server then retransmitted to the user's
computer.
` Audio is not supported in Relay Mode.
` If the router’s UPnP is not set, then you might be connected in relay
mode. The settings may differ depending on the connected
Broadband Router model. For more information, refer to the user
manual of the applicable router.
` If you have trouble connection to the camera, visit "http://www.
samsungsmartcam.com", go to support page, and refer to
“Troubleshooting” on it.
6. Live Video
a b c d e
f