Filter
Top Products
6
ENG
7
Components of your camera
Your camera has the following components:
1
Cover dome
: Covers the main body for protection.
2
Main body: Includes a lens, a switch board, a PCB
board, screws, and such.
3
Mount bracket
: Used as a ceiling or wall xture. It
is xed using three long tab screws provided in the
package.
4
Cable Stopper: If drawing the cable from a hole in
the ceiling, remove this stopper and pass the cable
through the opening to connect.
5
Zoom lever
: Using this lever, the lens zoom can be
adjusted and xed.
6
Focus lever
: The lens focus can be adjusted by
rotating it left or right. Rotate it clockwise for xing.
7
Tiltxingscrew
: Using this screw, the slope of the
lens can be adjusted and xed.
8
Switch board
: Includes two kinds of control switches
such as function switches and phase-control switches.
The board has eight function switches in the middle
and two phase-control buttons on each side of the
function switch area.
9
Installation Guide Mark: This mark must be aligned
with the marking on the bracket when attaching the
camera to the bracket.
0
Lock releaser
: Push it outward and rotate the main
body in UNLOCK direction when you want to remove
the Mount bracket from the Main body or to remove
the installed camera from the Mount bracket.
!
Cable
: Connect the Video connector to BNC cable
and Power connector to power adapter.
1
2
!
Power connector
Video connector
Lens
7 8 9
5
6
0
4
3
B5344_B5345-00687D(00).indb 7 2008-09-05 오전 10:40:23