Filter
Top Products
English _31
English
CTRL TYPE
By inputting the wire remote port, you may set up the A, B, C or D mode.
Code
Tele
Wide
Far
Near
A -6V +6V +6V -6V
B -6V +6V -6V +6V
C +6V -6V +6V -6V
D +6V -6V -6V +6V
COMMUNICATION
You can set the RS-485 communications setting in regard of the camera.
Select <MAIN MENU>-<COMMUNICATION>.
Select each item and set appropriately.
PROTOCOL, BAUD RATE, ADDRESS :
You can manually set the protocol, baud
rate and address.
SYSTEM INFO
You can check the system information.
Select <MAIN MENU>-<SYSTEM INFO>.
The current system information is
displayed.
1.
2.
3.
1.
2.
W
COMMUNICATION
X
RS485RS485
PROTOCOL SAMSUNGPROTOCOL SAMSUNG
BAUD RATE 9600BAUD RATE 9600
ADDRESS 0ADDRESS 0
W
SYSTEM INFO
X
TYPE 4_34 ZOM_WDR_PTYPE 4_34 ZOM_WDR_P
PROTOCOL SAMSUNGPROTOCOL SAMSUNG
ADDRESS 0ADDRESS 0
COMM. TYPE RS485, HALF COMM. TYPE RS485, HALF
BAUD RATE 9600BAUD RATE 9600
SERIAL NO. 000000000000000SERIAL NO. 000000000000000
CAMERA VER. v1.00CAMERA VER. v1.00
__
0000000000
SCC-C4239P-TRK-ENG.indd 31SCC-C4239P-TRK-ENG.indd 31 2009-10-9 9:31:492009-10-9 9:31:49