Filter
Top Products
36_ setup
setup
Select the preset number.
Select <POSITION> and adjust <PAN/
TILT/ZOOM> to the desired setup using
the joystick.
Set <PRESET ID> to <ON> and enter the
name.
For entering the name, refer to “CAMERA ID”.
(page 24)
Select <PRESET SPEED> and adjust the
pan/tilt speed of the preset.
Set the <DWELL TIME> that defines the
camera's hold duration and <IMAGE HOLD> of the preset.
If you set the <IMAGE HOLD> to <ON>, the video image will be held still until the
camera reaches the preset position.
Set <CAMERA SET> to <ON>.
You can adjust camera setups for each
preset.
For details on setting <IRIS>, <WHITE BAL>
and <FOCUS MODE>, refer to “CAMERA
SET”. (pages 24 ~ 32)
If VPS is set to ON in Camera Setup from
the main menu, the camera will operate in
VPS even if it's set to WDR in PRESET.
If you use WDR in PRESET, the camera will operate in WDR and release any previous
settings even if AGC has been set to FIX, SHUTTER to ON, SENSE UP to FIX in the
main menu.
2.
3.
4.
5.
6.
7.
M
PRESET
0 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
25 26 27 28 29
30 31
1/16
PRESET NO. 1
POSITION
PRESET ID ON
PRESET SPEED [
5
]
DWELL TIME 3SEC
IMAGE HOLD OFF
CAMERA SET ON
CAMERA SET
IRIS ALC
WHITE BAL
FOCUS MODE MF
00000A-EU2_SCC-C7455P-ENG.indb 36 2009-08-13 오후 9:54:15