Filter
Top Products
Version 1.1
- 15 -
4-2-1.
CAMERA SETUP
You can configure the general settings of the module.
Select
<
MAIN MENU>
→
<
CAMERA SET>.
The Camera Setup menu appears.
Change the settings as necessary, or select an item
to check.
●
CAMERA ID
The CAMERA ID menu is used for you to assign
a
unique
name to
a
camera.
Use
▲▼▶◀
_
to select
a
desired character, then press
[
ENTER]. In the lower input box of the screen, the selected
character will be entered.
-
You can enter up to
54
characters including
alphabets, numbers and special characters.
-
LOCATION
:
Specify the display position of the
camera ID.
When done, press
[
ENTER]. The camera ID will be displayed
in the specified position.
●
IRIS
The
IRIS
menu is used if you want to adjust the intensity of radiation incomin
g
to the camera.
◇
ALC
(
Automatic Light Control)
Adjust the open and close of the iris.
-
LEVEL
:
Select an overall brightness level.
The LEVEL menu is used to adjust the overall brightness,
where
“+”
will increase the brightness and
“.”
will decrease
it.
-
BLC
:
With
<
BACKLIGHT> set to
<
BLC>, you can specify
the BLC area. With AREA set to
<
USER>, you can specify
the position and size.
If you use an ordinary camera in
a
scene with an intensive
back light, the object will be displayed dark on the monitor
affected by the back light. To solve this problem, you can
use the
BLC(
Back Light Compensation) function to improve
the sharpness of the image in such
a
high contrast scene.