Filter
Top Products
ENGLISH
How to Use the Battery Pack
2424
Charging the Battery Pack
1. Slide [Mode Selector] up to turn the CAM off.
2. Attach the Battery Pack to the CAM.
3. Fix the CAM into the cradle.
4. Connect the AC power adapter to the DC In jack on the cradle.
◆ You can detach the AC adapter by pressing the buttons
on the sides of the adapter cable plug while pulling it out.
5. Insert the AC power adapter into the outlet.
✤ You can also charge the battery pack when you use the CAM
by connecting the AC power adapter to the CAM directly.
✤ It is recommended you fully charge the battery pack before use.
✤ You should only charge the battery in an environment between 32
°
F
and 104
°
F.
Warning
Note
Charging through the cradle
Charging directly to the CAM