Samsung SDC-241 SERIES Camcorder User Manual


  Open as PDF
of 12
 
16 17
COLOR CCD CAMERA COLOR CCD CAMERA
Connecting to Monitor
Connect the VIDEO Out jack to the monitor VIDEO In jack.
Connecting to Power
Each model has different power specification, please check the name of
the model and power specification before connecting to power source.
Please refer to the sticker identifying the model, which is attached on
the product, for power specification.
• As a connecting method varies according to instruments, refer to
the manual supplied with the instrument.
• Connect the cable after power is turned off.
• Set the 75Ω/Hi-Z selection switch as shown below if you have
intermediate device.
Monitor
AC adaptor
AC outlet
220V
100V
AC24VGND
AC adaptor
220V
100V
230V
230V~50Hz
CCDCamera
Intermediate
Endmonitor
•Thewireispolarized.Besureto
connectthewirewithwhitelineon
itscoveringto‘ -’terminaland
connecttheotheroneto
‘+’teminal.
•UseDC12Vpowersource
forSDC-311(241)ND/PD.
•UseAC24V~50Hzpowersource
forSDC-311(241)PA.
(Thewireisnon-polarized.)
•Thewireisnon-polarized.
•UseAC24V60Hzpower
sourceforSDC-311(241)NA.
※Connectthewirebypushingthe
button
•UseAC230V~50Hzpowersourcefor
SDC-311(241)PH.
•Besuretoconnectpowerafteralltheinstallationisdone.
•NotethatACadaptorisnotsuppliedwithcamera.
•SincethewireofDCpowertypeispolarized,becarefulwhen
Connectingit.
NOTE
Notes
CCDCamera
 previous next