Filter
Top Products
COLOR CCD CAMERA User’s Manual
31
COLOR CCD CAMERA User’s Manual
30
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
3. Select a desired mode using the Left and Right buttons and press the SET button.
• Select
WDR to adjust the WDR LIMIT. Select LOW, MIDDLE, or HIGH.
• Select ‘BLC’ to adjust the area to be enhanced by the WDR function.
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and
Down buttons so that the arrow indicates ’SSNR’ .
2. Select a desired mode using the Left and Right buttons.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
SSNR
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
WDR : When there are both bright and dark areas at the same time, this mode
makes both areas distinctive.
OFF : Deactivates the WDR function.
WDR
OFF
• You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’
menu is selected.
• Since the following symptoms may occur according to the ambient illumination
when WDR is selected, set it to OFF.
Color or screen changes unnaturally.
Noise appears in the bright part of the screen.
• Since the performance of the WDR function may be affected by the area of the
bright part of the screen, optimize the installation angle for the best WDR
performance.
• If you increase LIMIT, the screen display may be distorted.
• For high performance of WDR function, using DC Iris lens rather than manual lens is
recommended.
Notes
How to Use the Camera