Filter
Top Products
19
Starting the recording mode
Selecting modes
You can use the Mode dial on the back of your camera to select the
correct mode.
How to use the mode dial
Select the shooting mode by turning the mode dial to the selection
point.
Movie Clip mode
Smart Auto mode
Select point
Auto mode
Program mode
DUAL IS(Dual Image
Stabilization) mode
Photo Help guide mode
Beauty Shot mode
Scene mode
How to use the Smart Auto mode ( )
1. Select Smart Auto mode by using
the Mode dial.
2. The camera selects a scene
automatically. An appropriate mode
icon will appear at the top left of the
screen.
3. Press the shutter button to capture
an image.
The camera automatically chooses the appropriate camera settings
based on a detected type of scene. It will be helpful if you are not
familiar with the camera settings for various scenes.
If the camera does not recognize a proper scene mode, the
default settings will be used.
Even if there is a face detected, the camera may not select a
portrait mode depending on the subject’s position or lighting.
The camera may not select the correct scene depending on
shooting environments, such as camera shake, lighting, and
distance to the subject.
The [Night] mode recognizes scenes only when the fl ash is set
to off. The camera operates the [Tripod] mode after checking the
shooting condition on the tripod for a certain time.
Despite using a tripod, the camera may not select a tripod mode
depending on the subject’s movement.