Filter
Top Products
English-5-15
2) Move to ‘DHCP...’ by using KEY in NETWORK ACCESS, then press ENTER
SWITCH to set to DHCP.
3) DNS 1 and DNS 2 will be automatically set to DNS as shown above.
Use
¥ KEY to change it.
4) After setting, move to the main screen by using the MENU button.
5) Set values will be stored as shown below. It takes 2 or 4 seconds.
6) You can view the video source of the SMO-210DN from a remote location PC.
7) Make sure the remote PC meets the minimum specification requirements described in
Chapter 10. Product Features (Eng-10-6) and make sure that the PC is internet capable.
05/01/05 00:00:01
DHCP ACCESS
DNS 1 168.126.63.001
DNS 2 168.126.63.002
05/01/05 00:00:01
NETWORK SETTING
05/01/05 00:00:01
CAM1