Filter
Top Products
59
• The SMART AUTO mode automatically sets the Anti-Shake (HDIS) to On.
• Gross camcorder shake may not be entirely corrected even if “Anti-Shake (HDIS): On” is set.
Firmly hold the camcorder with both hands.
• When this function is set to “On,” the actual movement of the subject and the movement
displayed on the screen may be slightly different.
• When recording in dark lighting at high magnifi cation with this function set to “On,” may cause
after-images. In this case, we recommend using a tripod (not supplied) and turning the “Anti-Shake
(HDIS)” to “Off.”
Anti-Shake(HDIS)
Use the Anti-Shake (HDIS) function to compensate for unstable images caused by shaking movements when
holding the camcorder.
PRECHECK!
Select the Record ( / ) mode by pressing the MODE button.
page 24
Tip
Use the Anti-Shake function in the following cases:
• Recording when using the zoom extensively
• Recording a close up picture of a small object
• Recording while walking, or moving
• Recording through the window, from inside a vehicle
1. Press the MENU button
Control joystick (
/
)
“Anti-Shake
(HDIS).”
2. Select the desired submenu item with the Control joystick (
/
),
and then press the OK button.
3. Press the MENU button to exit the menu.
Submenu Items
items contents
on-screen
display
“Off”
Disable the function. -
“On”
The Anti-Shake (HDIS) function is enabled to
compensate for shaking movements.
Exit
STBY
0:00:00 [475Min]
Anti-Shake(HDIS)
Off
On
STBY
0:00:00 [475Min]
Anti-Shake(HDIS)
Off
On
Exit