Filter
Top Products
122_English
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not adjust
automatically.
Set "Focus" to "Auto."
➥
page 61
The recording conditions are not suitable for auto focus.
Adjust the focus manually.
➥
page 61
The lens is dusty on the surface. Clear the lens and check the focus.
Recording is being made in a dark place. Increase the brightness in the place.
•
•
•
•
The image appears too bright or
flickering, or changes in colour.
This occurs when recording images under a fluorescent lamp, sodium lamp, or
mercury lamp. Cancel "iSCENE" to minimise these phenomena.
➥
page 54
•
Playback on other devices (TV, etc.)
Symptom Explanation/Solution
You cannot view the image or
hear the sound on the connected
device.
Connect the audio line of the Audio/Video cable jack to your camcorder and the
connected device (TV, DVD recorder, etc). (Red colour- right, White colour- left)
The Audio/Video cable jack is not connected properly. Make sure that the Audio/
Video cable jack is connected to the proper jack.
➥
page 95
•
•
Playback on your camcorder
Symptom Explanation/Solution
Pressing the playback (Play/Pause)
button did not start playing.
Press the MODE button to set Video Play mode.
Image files recorded on another camcorder may not play on your camcorder.
Check out a memory card compatibility.
➥
page 38
•
•
•
The Skip or Search function does
not work properly.
If the temperature inside the camcorder is too high, it cannot function properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
•
Playback is interrupted unexpectedly.
Check if the AC adaptor or battery pack is properly connected and stable.
•
You cannot hear sound when
playing a Time Lapse recording.
The Time Lapse REC function does not support sound.
➥
page 66
•
Photos stored on a storage media
are not displayed in the actual size.
Photos recorded on other devices may not appear at actual size.
This is not an error.
•
troubleshooting