Filter
Top Products
INITIAL SETTING : TIME ZONE, DATE AND TIME & OSD LANGUAGE
Initial setting is available in all operating modes.
To read the menus or messages in your desired language, set the OSD language.
To store the date and time during recording, set the time zone and date/time.
Turning the power on and setting the date and time
Set the date and time when using the camcorder for the fi rst time. If you do not set date and
time, the date and time (time zone) screen appears every time you turn on your camcorder.
1. Open the LCD screen and then the camcorder is powered on automatically.
➥
page 23
When you turn on your camcorder for the fi rst time, the Time Zone screen
appears based on London, Lisbon. (Greenwich Mean Time)
You can also set the “Time Zone: Home” from the Settings ( ) menu.
➥
page 86
2. Select your geographical area with Control button (
/
), then press the OK button.
The Date/Time Set screen appears.
3. Select the date and time information, and change the setting values by using the
Control button (
/
/
/
).
4. Make sure the clock is correctly set, and then press the OK button.
•
•
•
•
•
•
The year can be set up to 2037, using the “Home” menu.
Activating the ( ) icon forwards the time by 1 hour.
Charging the built-in rechargeable battery
The built-in battery is always recharged while your camcorder is connected to the AC
power or while the battery pack is attached. If the camcorder is not in use for about
2 months without connecting to the AC power or attaching the battery pack, the built-in
battery fully discharges. If this occurs, charge the built-in battery by connecting to the
supplied AC adaptor for 24 hours.
After setting, the date and time are automatically recorded on a special data area of the
storage media.
•
•
•
•
~
{
vu
vmm
tvk
l
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change the Date/Time Display mode.
➥
page 89
Simple setting of the clock by time difference
You can easily set the clock to the local time by setting a time difference when using your camcorder abroad.
Select "Time Zone" on the menu, then set the time difference.
➥
page 86
•
•
34_English
preparation
Date/Time Set
Home
Visit : 01/JAN/2009 00:00
Back Move OK
00002009
://
JAN
01
Day Year Hour Min
Month
Date/Time Set
Home:
[GMT 00:00]
01/JAN/2009 00:00
Home
London, Lisbon