Filter
Top Products
preparation
This section provides information that you should know before using this camcorder: such as how to use the provided
accessories, how to charge the battery, and how to setup the operation mode and initialize setup.
English_15
ADJUSTING THE LCD SCREEN
The wide LCD screen on your camcorder offers high quality image viewing.
1. Open the LCD screen with your fi nger.
• The screen opens up to 90°.
2. Rotate the LCD screen towards the lens.
• You can rotate it up to 180° towards the lens and up to 90° backward. To view recordings
more conveniently, rotate the screen by 180° towards the lens, then fold it back to the body.
When the LCD screen is rotated by 180°, the left and right sides of the subject are shown in reverse, which produces
horizontally fl ipped image.
Remove fi ngerprints or dust on the screen with a soft cloth.
•
•
WARNING
Excessive rotation may damage the connective hinge between the screen and the
camcorder.
ATTACHING THE GRIP BELT
Adjust the length of grip belt so that the camcorder is stable when you
press the Recording start/stop button with your thumb.
Please note if the hand strap is adjusted too tight and you use
excessive force to insert your hand, the hand strap hook of the
camcorder may be damaged.
WARNING
~
{
vu
vm
m
tv
k
l
1 2
ATTACHING THE CORE FILTER
Attach the core fi lters to the cables. The core fi lter reduces interference.
1. To open the core fi lter, release the stoppers on both
ends of the core fi lter.
2. Attach the core fi lter to the cable near its connecter as
shown in the fi gure.
3. Close the core fi lter until it clicks shut.
Take care not to damage the cable.
When connecting a cable, attach the end with the
core fi lter to the camcorder.
•
•
Core Filter
1
3
Stopper
Wind the cable so that it is not slack.
a mini HDMI cable
a USB cable
2