Samsung SNC-B5368P Security Camera User Manual


 
15
English
Auto Network Setup
Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
Select a camera in the search list.
Find the MAC (Ethernet) address labeled on
the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
Click [Auto Set].
The AUTO SET dialog appears.
The <IP Address>, <Subnet Mask>, and
<Gateway> will be set automatically.
Enter the password.
This is the login password for the "root"
user who accesses the camera.
The default password is "4321".
Click [OK].
Auto network setup will be completed.
The camera will automatically complete
the network setting and restart.
M
1.
2.
3.
4.
5.
SNC-B5368-ENG-QG.indd 15 2009-08-19 오후 8:42:42