Filter
Top Products
SPEED DOME CAMERASPEED DOME CAMERA User’s ManualUser’s Manual
1312
Camera Holder Connection Camera Holder Initial Settings
Setting Communications Protocol
Use the SW3 of installation bracket to set the communications protocol.
SW3 Protocol Baud Rate(BPS)
0 Samsung 9,600
1 Samsung 19,200
2 Pelco-D 2,400
3 Pelco-D 4,800
4 Pelco-D 9,600
5 Pelco-P 4,800
6 Pelco-P 9,600
7 Samsung Elec. 9,600
8 Samsung Elec. 19,200
9 Panasonic 9,600
A Panasonic 19,200
B Vicon 4,800
C Vicon 9,600
D Honeywell 9,600
E AD 4,800
F Bosch 9,600
Part Names and Functions
ENGLISH
• In order to control the speed dome camera by personal computer, exclusive program
should be used.
Notes
• If the speed dome camera is controlled by the Panasonic and Vicon controller, please
contact with our company custom satisfication part and technical part.
• Control setting(When using AD Protocol)
- The AD Protocol is only valid for RS-422
- In relation to controller compatibility
1. Display Camera OSD : 3 + Auxiliary ON
2. Exit Camera OSD : 3 + Auxiliary OFF
3. ENTER : IRIS OPEN
4. ESC : IRIS CLOSE
• Please see our homepage for details on the protocol
Notes