Samsung SPD-3700 Security Camera User Manual


 
SPEED DOME CAMERA User’s Manual
58
SPEED DOME CAMERA User’s Manual
59
Start Limit
Enter: Set ESC: Exit
End Limit
Enter: Set ESC: Exit
Pan/Tilt Limit
Pan Limit
Tilt Limit
Pan/Tilt Limit
Position
ON/OFF OFF
P/T Setting
Pan/Tilt Limit
Area Setting
Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
Auto Track1
Auto Track2
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Start Limit
Enter: Set ESC: Exit
End Limit
Enter: Set ESC: Exit
16. Pan/Tilt Limit
Main Menu/P/T Setting/Pan/Tilt Limit
The moving ranges in the Pan/Tilt directions can be limited.
Position
:
Selecting the Position menu brings up the following screen
if it is for the Pan Limit setting. Move the joystick left and
right to select a movement range from the starting point to
the end.
On/Off
:
Cancels or activates the Pan/Tilt Limit functions.
The following picture shows the Tilt Limit setting.
Move the joystick left and right to select a movement
range from the starting point to the end.
Functional Description Functional Description
P/T Setting
End Position
Enter: Set ESC: Exit
Start Position
Enter: Set ESC: Exit
17. Area Setting
Main Menu/P/T Setting/Area Setting
The Area Setting menu enables selecting certain locations in
the course of the Pan and Tilt operation, and then display the
areas with the OSD (On Screen Display) texts when the camera
passes through them. Up to 8 areas can be selected.
Area Name
:
You can add names to selected areas. Names can be up to
12 characters and can be entered via the joystick and the
Enter key. Once a name is entered, use the joystick and the
Enter key to perform the Set command and save the name.
Position
:
As shown in the picture below, move the joystick to select
the upper left corner and lower right corner of an area.
On/Off
:
Cancels or activates the display function of selected areas.
Area Setting
Area 1
Area 2
Area 3
Area 4
....
P/T Setting
Pan/Tilt Limit
Area Setting
Area Masking
Prop. P/T ON
Digital Flip ON
Image Hold OFF
Auto Track1
Auto Track2
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Area 1
Area Name
Position
ON/OFF OFF
Area Name 001[ ]
0123456789()[]#&%/~-=_
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
äöÖüÄÜàâçéèêëîïôûôùÿñÑáí
óúÀÂÇÉÈÊËïïÔߌæÑÛÙŸÁÍÓÚÂ
ABC->中文1 BACK SPACE CLR SET