Filter
Top Products
Operating Your Camera
COLOR CCD CAMERA User’s Manual
37
COLOR CCD CAMERA User’s Manual
36
SPECIAL SETUP
USER PRESET OFF
PRIVACY OFF
DAY/NIGHT COLOR
SYNC INT
COMM ADJ
IMAGE ADJ
SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK.
In LINE-LOCK mode, it synchronizes the camera’s video out signal to the external
SYNC signal.
•INT : Internal synchronization
•LL: External line-lock synchronization
· If you choose ‘LL’, you can adjust the desired phase.
Press the SET button.
· You can adjust the desired phase from 0 to 359.
• For NTSC models, the line-lock mode can be used if the external SYNC signal
frequency is at 60Hz.
• For PAL models, the line-lock mode can be used if the external SYNC signal
frequency is at 50Hz.
Notes
COMM ADJ: Use this feature to select communication
protocol . Position the indicator over
'COMMUNICATION' using the UP or
DOWN button.
•GROUP SEL : Choose up to eight groups. Each group can consist of four mask
areas.
•AREA SEL : Configure eight mask areas.
•AREA MODE : Mask area display.
•MASK TONE : Adjust desired mask color level.
•TOP : To move the mask area up.
•BOTTOM : To move the mask area down.
•LEFT : To move the mask area left.
•RIGHT : To move the mask area right.
DAY/NIGHT: Select from COLOR, BW or AUTO modes.
•COLOR : Color mode.
•B/W : BW mode.
•AUTO1, 2 : The camera automatically detects lighting conditions and selects the
mode accordingly. Auto 1 mode is switched to IR Cut Filter more
lightning conditions than Auto 2.
SPECIAL SETUP
USER PRESET OFF
PRIVACY OFF
DAY/NIGHT COLOR
SYNC INT
COMM ADJ
IMAGE ADJ
END
• When selecting AUTO2 mode, the AGC is fixed at HIGH mode.
Notes