Filter
Top Products
16
Set up your video
presenter properly.
(see page 8 and 9.)
Connect to a TV or monitor to display the image.
(see page 10.)
Turn the power of the output device and the video presenter on.
To project an object on the video presenter
ZOOM
IRIS
POWER
Place the object on the lightbox, and adjust the head to face
the object.
0
1
2
3
4
5
If you want to
rotate the
image
displayed, use
this switch to
adjust the lens
position.
To adjust the
height to put the
lens closer to the
document, lower
the arm while
you hold down
the arm lock
button.
If there is no image on the TV
or monitor, check if the cable
is properly connected, and
press the INT/EXT button of
the presenter to select the
input mode to INT OUT.
POWER
Using the presenter Continued