Filter
Top Products
ENGLISH
1919
Preparation
Connecting a Power Source
About the Operating Modes
✤ There are two types of power source that can be connected to your
Camcorder.
- The AC Power adapter and AC Cord: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a house hold power source to use
the Camcorder without worrying about the
battery power. You can keep the Battery Pack
attached; the battery power will not be
consumed.
1. Turn the [Power] switch to [OFF].
2. Connect the AC Power adapter (AA-E8
Type) to the AC Cord.
3. Connect the AC Cord to a wall socket.
The plug and wall socket type may differ
according to your resident country.
4. Connect the DC cable to the DC jack of the Camcorder.
5. Set the Camcorder to each mode by holding down the tab on the
[Power] switch and turning it to the [CAMERA] or [PLAYER] mode.
✤ The operating modes are determined by the position of the [Power]
switch and the [Mode] switch.
✤ Set the Operation Mode by adjusting [Power] switch and [Mode]
switch before operating any functions.
[Note]
■
The <M.Cam> and the <M.Player> Modes are only enabled on VP-
D363(i)/ D364W(i)/ D365W(i).
✤
1. [Power] [OFF]
2.
AA-E8
3.
4.
5. [Power]
[CAMERA] [PLAYER]
✤
[Power] [Mode]
✤
[Power] [Mode]
■
<M.Cam> <M.Player>
VP-D363(i)/ D364W(i)/ D365W(i)
Q
U
I
C
K
M
E
N
U
P
L
A
Y
E
R
C
A
M
E
R
A
Power Switch
Mode Name
[Power] Switch
[Mode] Switch
(VP-D363(i)/D364W(i)
/D365W(i) only)
<Camera
Mode>
<M.Cam
Mode>
<Player
Mode>
<M.Player
Mode>
C
A
M
E
R
A
P
L
A
Y
E
R
C
A
M
E
R
A
P
L
A
Y
E
R
C
A
M
E
R
A
P
L
A
Y
E
R
C
A
M
E
R
A
P
L
A
Y
E
R
[Power]
[Mode]
VP-
D363(i)/D364W(i)
/D365W(i)
<Camera Mode>
<M.Cam Mode>
<Player Mode>
<M.Player Mode>
C
A
M
E
R
A
P
L
A
Y
E
R
C
A
M
E
R
A
P
L
A
Y
E
R
C
A
M
E
R
A
P
L
A
Y
E
R
C
A
M
E
R
A
P
L
A
Y
E
R