Filter
Top Products
ENGLISH
7676
Playback
✤ The Audio Dubbing function works only in Player Mode.
✤ You cannot dub sound on a pre-recorded tape in LP or 16 bit mode.
✤ You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
✤ Use the internal or an external microphone (not supplied) or other audio equipment.
✤ The original sound will not be erased.
1. Set the Power switch to PLAYER.
■
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the Camcorder.
2. Set the Mode switch to TAPE.
■
When you wish to dub using the External A/V input, connect the Multi-AV
cable to the Multi-AV jack at the front side of camcorder. (see to page 75)
3. Press the (PLAY/STILL) button and find the time frame of the scene to
be dubbed.
4. Press the (PLAY/STILL) button to pause the scene.
5. Press the A.DUB button on the remote control.
■
Audio dubbing ( ) icon will be displayed.
■
The Camcorder is ready for dubbing.
6. Press the (PLAY/STILL) button to start dubbing.
7. Press the (STOP) button to stop the dubbing.
[ Notes ]
■
You cannot use the Audio dubbing function while playing a write protected video tape.
■
To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the Multi-AV cable to connect to
external sound source input.
■
To dub an external sound source, set the AV In/Out function to AV In. (VP-D453i/D454i/D455i only) (see page 75)
Dubbing Sound
Audio Dubbing (VP-D453(i)/D454(i)/D455(i) only)
√
1
3 4 5