Filter
Top Products
ENGLISH
8282
USB Interface (VP-D453(i)/D454(i)/D455(i) only)
✤ The USB Version function works only in M.Cam and M.Player modes.
✤ To ensure proper communication between the camcorder and a PC, please set the USB Version before connecting
the Camcorder to a PC.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to MEMORY.
3. Press the MENU button.
■
The menu list will appear.
4. Move the Menu selector to the left or right to select System, then press the Menu selector.
5. Move the Menu selector to the left or right to select USB Version, then press the Menu
selector.
6. Move the Menu selector to the left or right to select USB 1.1 or USB 2.0, then press the Menu
selector.
■
Set the USB Version to USB 2.0 when it is supported by both PC and its
OS (Operating System).
■
If either the PC or OS does not support USB 2.0, set the USB Version to USB 1.1.
7. To exit, press the MENU button.
[ Notes ]
■
When USB Version is not set properly, the USB connection may fail to establish.
■
USB 2.0 may not be supported by certain PCs depending on their specifications.
In this case, choose the USB 1.1 for USB connection.
■
If USB 2.0 is not supported by the PC, USB 1.1 will automatically be used for the USB connection.
Setting the USB Communication Speed
M.Player Mode
√System
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
√On
√On
√USB 2.0
√Computer
√English
Move Select Exit
MENU
Move Select Exit
MENU
1
USB 1.1
USB 2.0
M.Player Mode
Back
Clock Set
Remote
Beep Sound
USB Version
USB Connect
Language
4
6