Filter
Top Products
4
Photo capture
ENGLISH
94
Digital Still Camera Mode (VP-DC163(i)/DC165W(i)/DC165WB(i) only)
Taking a Photo Image (JPEG) on a Memory Card
You may take photo images while in M.Cam Mode and store the
images on the Memory Card.
page 26
You can take photo images using the remote control.
(VP-DC163(i)/DC165W(i)/DC165WB(i) only)
Audio will not be recorded with a photo image on to the Memory
Card.
Please check the protection tab setting on your memory card
before recording. You may not be able to record when it is set to
lock.
1. Insert the Memory Card.
2. Set the
[Mode] switch to [CARD].
3. Set the
[Power] switch to [ (Camera)].
4. After framing your subject, fully press the
[PHOTO]
button to take the picture.
The picture is taken and saved into the
Memory Card within a few seconds.
Taking another picture within this
interval is not possible.
The <Photo capture> indicator appears
during the time it takes to save the
image.
Notes
Saved photo images will appear slightly
larger than what is shown on the LCD
screen when the photos are taken.
Photo images are saved in the Memory Card in an 800x600 format.
The number of photo images that can be stored depends on the
quality of the image.
中 文
数码相机模式(仅限VP-DC163(i)/DC165W(i)/DC165WB(i))
在记忆卡上拍摄（JPEG）的静止图像
可以在照片摄制模式下拍摄静止图像并将图像存储在记忆卡上。
26页
可以使用遥控器拍照。(仅限VP-DC163(i)/DC165W(i)/DC165WB(i))
声音将不随静止图像保存在记忆卡上。
录像前请检查记忆卡上的保护锁定设置。您可能无法在此锁定键设
置为锁定时进行录像。
1. 插入记忆卡。
2. 设置模式
[Mode]键到[CARD]。
3. 设置电源
[Power]键到摄录模式[ (Camera)]。
4. 对被摄物体取景后，完全按下拍照
[PHOTO]
键拍照。
拍摄并在数秒内将照片存入记忆卡。
在这段间隔时间内不能拍另一张照片。
在保存图像所需的时间内，液晶显示屏上显示
<Photo capture> (照片拍摄)图标。
注意
已保存的照片看起来要比拍照时显示在LCD屏幕上
的照片稍大一点。
可按800x600格式在记忆卡中存储静止图像。
可存储静止图像的数量取决于图像质量。