Filter
Top Products
4
3
3
STBY
30 min
SP
-
RW
VR
0:00:00
ENGLISH
44
DVD Camcorder: Basic Recording
Recording with Ease for Beginners (EASY.Q Mode)
The EASY.Q function works only in Camera Mode.
page 26
The EASY.Q function allows a beginner to easily make good
recordings.
1. Set the
[Mode] switch to [DISC].
(VP-DC163(i)/DC165W(i)/DC165WB(i) only)
2. Set the
[Power] switch to [ (Camera)].
3. By pressing the [EASY.Q]
button, all functions
on the DVD Camcorder will be set to off and the
recording settings will be set to the following
basic modes (DIS, AF(Auto Focus), AWB(Auto
White Balance), AE(Auto Exposure)) ON:
The word <EASY.Q> and DIS ( ) appear
on the display at the same time.
4. Press the
[Start/Stop] button to start recording.
Recording will begin using the basic
automatic settings.
5. Press the [EASY.Q] button again in the STBY
mode to turn the EASY.Q mode off.
The EASY.Q function will not turn off while
you are recording.
The DVD Camcorder will return to the
settings that were set prior to activating
EASY.Q mode.
Notes
In EASY.Q mode, certain functions are not
available, such as Menu, BLC, Manual focus,
Color Nite. If you want to use these functions,
you must first turn the EASY.Q mode off.
The EASY.Q mode settings are released when
the Battery Pack is removed from the DVD
Camcorder and must be reset when the Battery
Pack is replaced.
16:9 Wide is not available in the EASY.Q mode.
(VP-DC161(i)/DC163(i) only)
Digital Effect and Digital Zoom is not available in the EASY.Q mode.
中 文
DVD摄像机:基本录像
初学者轻松录制（EASY.Q模式）
EASY.Q功能只能在摄像模式下使用。
26页
EASY.Q功能可以使初学者轻松录制好。
1. 设置模式
[Mode]开关到光盘[DISC]。
(仅限VP-DC163(i)/DC165W(i)/DC165WB(i))
2. 设置电源
[Power]开关到摄录[ (Camera)]。
3. 通过按下
[EASY.Q]按钮，DVD摄像机上的所有
功能将设置为关，而录像设置将会设置为下列
基本模式（手抖动补偿、AF（自动对焦）、AWB
（自动白平衡）、AE（自动曝光））开：
<EASY.Q>这个字将会和手抖动补偿（ ）
同时在画面上显示。
4. 按开始/停止
[Start/Stop]键开始记录。
录制开始时将使用基本自动设置。
5. 在待机模式下再次按下
[EASY.Q]就会关闭
EASY.Q模式。
录制的时候EASY.Q将不会关闭。
DVD摄像机将会返回启动EASY.Q模式前设置
的设置值。
注意
在EASY.Q模式下，例如Menu，BLC，Manual
focus，Color Nite等功能将不能使用。
如果想使用这些功能必须先退出EASY.Q模式。
在从DVD摄录机中取出电池时，简易模式设置将
会丢失，并且在更换电池之后，必须重新设置
简易模式。
在EASY.Q模式下不能使用16:9 宽屏幕。
(仅限VP-DC161(i)/DC163(i))
在EASY.Q模式下不能使用数字效果和数字变焦。